NVR4POE / NVR8POE Quick Operation Guide
11
Steps:
1.
Open web browser, input the IP address of the device and then press Enter.
2.
Login to the device.
If the device has not been activated, you need to activate the device first before login.
1)
Set the password for the admin user account
2)
Click
OK
to login to the device.
STRONG PASSWORD RECOMMENDED
– We highly recommend you create a strong
password of your own choosing (using a minimum of 8 characters, including upper case
letters, lower case letters, numbers, and special characters) in order to increase the security of
your product. And we recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better protect your product.
If the device is already activated, enter the user name and password in the login interface, and
click the
Login
button.
3.
Install the plug-in before viewing the live video and managing the camera. Please follow the installation
prompts to install the plug-in.
You may have to close the web browser to finish the installation of the
plug-in.
The unit is set to DHCP by default and will pull a DHCP address when connected to your network. This
address can found by entering the NVR Menu > Configuration > Network > General Tab. If the unit does not
pull a DHCP address, the default IP address is 192.0.0.64.
The default user name is admin, and password is 12345.
You may use one of the following listed web browsers: Internet Explorer 6.0, Internet Explorer 7.0, Internet
Summary of Contents for NVR4POE
Page 1: ......
