Northern IP4TIR100, Installation & Quick Setup Manual

Page: 19 / 36

IP4TIR100 IP Turret Camera
·
Quick Start Guide
18
18
Feed the plugless network cable ⑦ through the lock nut ⑥ , 1.
waterproof rubber gasket ⑤ (rubber gasket inset ridge must
face waterproof endcap), and the waterproof endcap ④ in
order.
Crimp an RJ-45 network plug ③ onto the end of the cable, 2.
taking care to insert the twisted pairs of wires in correct order.
Place the O-type gasket ② onto the end of the camera’s 3.
network interface socket ① .
Insert the network plug ③ into the camera’s network interface 4.
socket ① .
Insert the waterproof rubber gasket ⑤ into the waterproof 5.
endcap ④ , and secure lock nut ⑥ with the waterproof
endcap ④ .
Align the snap on the waterproof endcap ④ with the notch on 6.
the camera’s network interface socket ①, and then secure the
waterproof endcap ④ to the camera’s network interface
socket ① to finish installation.