Contrast – Use the UP and DOWN buttons to move to the CON location and press the MENU button, then use
the LEFT and RIGHT
buttons to alter figures.
Bright, Chroma and Tint – The method of alteration is same as contrast setting.
4.
DISPLAY MODE
：
Move to the DISPLAY MODE location, then press the MENU button, a screen will appear as below.
TIME/DATE
：
ON
CHANNEL NAME
BOUNDARY
：
ON
：
ON
Press the UP and DOWN buttons to move to the selected item for setting and use the LEFT and RIGHT
buttons to alter the contents.
Press the EXIT button that will end the setting.
5.
AUTO ADJUST
：
Move to the DISPLAY MODE location, then press the MENU button, a screen will appear as below.
AUTO DWELL TIME:05
CH1
CH2
CH3
CH4
QUAD
：
ON
：
ON
：
ON
：
ON
：
ON
Press the UP and DOWN buttons to move to the selected item for setting and use the LEFT and RIGHT
buttons to alter the contents.
Press the EXIT button that will end the setting.
6.
VIDEO SIGNAL:
This setup is used for matching with the video signal inputs. There are Auto, AHD, CVI, TVI and CVBS
that can be selected
.
7. OUTPUT MODE:
Move to the OUTPUT MODE location, then press the MENU button that will enter the resolution list as
below.
800 X 600
1024 X 768
1280 X 1024
1400 X 900
1920 X 1080
Use the UP and DOWN buttons to move to the selected item and press the MENU button to confirm.
■
To end the setup MENU, just press the EXIT button.
