Northern DTW212H960, User Manual

Page: 8 / 28

Installation Installation
HOW TO INSTALL
1. Camera installation
(1) Fix the camera set with the supplied screws on ceiling or wall mount.
If you don't use supplied screws, the camera may fall off.
(2) Please refer to '4. Camera angle adjustment' regarding adjust camera angle.
(3) Lens adjustment
①
By turning the "Tele-Wide" knob,
you can access a range of focal
lengths within specified limits.
②
Then, by turning the "Near-Far"
knob, you can set the focus toward
the desired object.
1. Pipe Application
(1) Remove the screw for fixing a cable on the bottom of the base.
(2) Open the DOME COVER.
(3) Remove the TAP COVER and place the cables there.
(4) After distributing cables, use TEFLON tape on pipe threads.
(5) Combine the pipe to the base.
1
2
w
N
F
T
CABLE
PIPE
TEFLON TAPE
CABLE FIXING SCREW
DOME COVER
TAP COVER
4. Camera angle adjustment :
(1) Pan adjustment :
Grasp the disk of camera
and then adjust direction
to the right or left (-180˚~ 180˚)
(2) Tilt adjustment : Grasp the
LED cover of camera and
then adjust direction up or
down (6˚~ 90˚)
(3) Roll adjustment : Grasp the camera holder and then rotate (-178˚~178˚)
(4) Re-assemble the camera.
ROTATION
U
D
R
L
LED COVER
DISK
CAMERA
HOLDER
<Caution>
Do not force past adjustment
range or damage may occur.
✽
For LED model, the IR LED bank is
hinged, and can be moved back to
allow access to lens adjustment. After lens adjustment is made,
be sure to move IR LED bank back to original position.