18
Flash Installation Guide
P0908433 01
To determine the Flash Feature Codes:
1.
Press
ƒ
·
•
⁄
on a Norstar
M7310, M7324, or M7410 telephone.
If you are using the low range of feature
codes, press
ƒ
·
•
fi.
2.
Record the Feature Code for the first feature
used by Flash in Table 5 above and on the
Flash Programming Record or the
Flash ACD Programming Record.
XX
represents a number between 00 and 99.
Note: On Flash ACD only systems, the first
feature used is
Open mbox: F9XX
.
3.
Press
NEXT
to show the next Feature Code
used by Flash. Record this code on the Flash
Programming Record, and above in Table 5,
“Assigned Feature Codes,” on page 17.
4.
Repeat step 3 until you reach the final Flash
Feature Code.
This is the final display if you are installing
Flash ACD or Flash ACD and
Flash Voice Mail.
This is the final display if you are installing
Flash Voice Mail only.
Press
® to end this Flash session.
Leave msg: F9XX
NEXT
Leave msg: F9XX
Q Status: F9XX
QUIT
Interrupt: F9XX
QUIT
Summary of Contents for Flash Basic 2
Page 2: ......
