11
4)
Pull the starter grip slowly and return it to its original position when resistance is felt.
Note: The above operation is necessary to prevent outside moisture air from intruding into the
combustion chamber.
Caution
** If the engine has been running hard, do not stop it abruptly from the full load.
** Cut down the speed (load) and allow the engine to run idle for a few more minutes.
8. Transportation
1)
Transport the plate compactor by vehicle or lift crane after securely fasten with rope or chain on the motor
vehicle.
2)
Make sure to hold the transportation grip (or lifting lug) properly when lifting plate compactor. Holding the
handle for transportation may cause an injury.
Caution
** Do not transport the plate compactor with fuel in its fuel tank by the motor vehicle.
** Never lifting the plate compactor by a person especially when to put it on and off from the transporting
vehicle; it may injure
on person’s back.
** To avoid burns or fire hazards, let engine cool down before transporting it or indoor storage.
** Turn the fuel valve to
“off” position and keep the engine level to prevent fuel from spilling.
9. Storage
In case of storing the plate compactor for a long period of time (for more than 30 days):
1)
Remove the foreign substances such as soil, stone or dirt from plate compactor and its engine
2)
Clean the engine cylinder cooling fins.
3)
Clean or replace the air filter.
4)
Change the engine oil and follow procedures described in engine manual for engine storage.
5)
Cover it up with dry cloth completely for storage.
6)
Store the plate compactor and its engine in a clean, dry area.
