maximum spindle speed is 5400 RPM.
•
If the maximum spindle speed exceeds 5400 RPM, stop using the Cutter and have it
repaired by an authorized service professional.
ADJUSTING THE DRIVE BELT
The Drive Belt is enclosed and protected from dust, dirt and mechanical damage when the
tool is operating. To adjust the Belt:
1. Loosen the two bolts (A).
2. Turn the tensioning screw (B) so that the nut (C) is located directly under the arrow
on the cover.
3. Shake the Head to ensure the spring is in position to tension the Belt; the Belt now
has the correct tension.
4. Tighten the two bolts (A).
CHANGING THE DRIVE BELT
To change the drive belt, follow these instructions:
1. Tighten the two bolts (A).
2. Turn the tensioning screw (B) until the tension has been released.
3. Remove the two bolts (A).
4. Remove the Front Belt Cover (E).
5. Remove the Belt from the Pulley.
6. Remove the Cutting Head.
7. Loosen the bolt (D) and remove the Back Belt Cover (F).
8. Replace the Drive Belt.
9. Replace the Back Belt Cover (F) and tighten the bolt (D).
10. Replace the Cutting Head.
11. Replace the Front Belt Cover (E).
12. Replace the two bolts (A).
13. Tighten the tensioning screw (B).
14. Tighten the two bolts (A).
NOTE
: A new Drive Belt should be tensioned after using 1-2 tanks of fuel
.
16
