Page of 8
3
·
Keep children and bystanders
away while operating a power tool. Distractions can cause you
to lose control, so visitors should remain at a safe distance from the work area.
·
Be aware of all power lines, electrical circuits,
water pipes and other mechanical hazards in
your work area, particularly those hazards below the work surface hidden from the operator’s
view that may be unintentionally contacted and may cause personal harm or property damage.
·
Be alert of your surroundings.
Using power tools in confined work areas may put you
dangerously close to cutting tools and rotating parts.
ELECTRICAL SAFETY
·
WARNING:
Always check to ensure the power supply corresponds to the voltage on
the rating plate.
·
Do not abuse the cord.
Never carry a portable tool by its power cord, or yank tool or extension
cords from the receptacle.
Keep power and extension cords away from heat, oil, sharp edges or
moving parts. Replace damaged cords immediately.
Damaged cords may cause a fire and
increase the risk of electric shock.
·
Do not expose
power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
·
The sharpener-motor can be used continuously for 20 minutes; then, it needs to be turn off to cool
down to avoid possible damage from over- heating
·
If sharpening chain on an electrical saw, always disconnect the electrical saw power cable.
PERSONAL SAFETY
·
Stay alert,
watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
·
Dress properly.
Do not wear loose clothing, dangling objects, or jewelry. Keep your hair, clothing
and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving
parts. Air vents often cover moving parts and should be avoided.
·
Use safety apparel and equipment.
Use safety goggles or safety glasses with side shields
which comply with current national standards, or when needed, a face shield. Use as dust mask
in dusty work conditions. This applies to all persons in the work area. Also use non-skid safety
shoes, hardhat, gloves, dust collection systems, and hearing protection when appropriate.
·
Avoid accidental starting.
Do not carry the power tool with your finger on the switch. Ensure
the switch is in the off position before plugging tool into power outlet. In the event of a power
failure, while a tool is being used, turn the switch off to prevent surprise starting when power is
restored.
·
Do not overreach.
Keep proper footing and balance at all times.
·
Remove adjusting keys or wrenches
before connecting to the power supply or turning on the
tool. A wrench or key that is left attached to a rotating part of the tool may result in personal injury.
·
Never wear rings, bracelets and/or loose clothing that could come into contact with the grinding
wheel.
·
Always wear gloves and approved protective eyewear while operating or maintaining the sharpener.
·
Before starting up the sharpener, check that the working area is free of tools or other objects.
·
Keep all other people or by-standards away from work area during its operation.
·
Always work in a stable and safe position.
