Northern Diver Divemaster Commercial Manual Download Page 6

NDiver Drysuit Manual  |  East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK 

Your drysuit will be fitted with a BDM metal 

dry zip. The zip teeth must be kept clean to 

operate properly for long product life.

Your drysuit zip is situated either 

horizontally across the shoulders (rear 

entry), or diagonal on the front section 

of the torso (front entry). It is usually 

positioned so that it closes from left to 

right. This is because most people are right 

handed and will be less likely to damage 

the zip, or catch clothes or foreign objects 

in the zip while closing it. You/your buddy 

must place one finger directly in front of 

the slider as it is closed, helping to guide 

the undergarment or foreign objects away 

from the zip teeth. Also make sure that you/

your buddy fully tucks in the interior zip flap 

before closing the zip.

All drysuit zips should be washed after each dive and lubricated 

(see page 7)

Always pull the slider slowly and in the direction it is travelling (never pull it at an 

angle). Ensure that there is no hair or clothing caught in the zip and that the zip 

has been fully opened before you put on your drysuit. Failure to open completely 

may result in the zip being damaged.

The zip must be fully opened before you remove your drysuit. Clean the zip with 

fresh clean water. If the zip is particularly dirty, a toothbrush can be used. If using 

a toothbrush, do so gently. Mild soapy water can be used for heavy soiling. Close 

the zip when you hang / store the drysuit. Do not fold, bend or apply pressure to 

the zip (other than the small amount of pressure required to open and close it).

Rear entry zips

Do not attempt to close the zip yourself. To close the zip with the least chance of 

damage, extend your arms level in front of you. Advise your buddy to draw the zip 

closed from left to right, keeping one finger in front of the slider to prevent clothing 

and foreign object damage to the teeth. Make sure the slider is drawn tight up 

against the rubber stop on the right hand side. If the slider is not tight against the 

stop, the zip will leak.

Front entry zips

The closing-opening operation can be done without the help of your buddy. 

However, it is suggested to use the same precautions described for the rear entry 

zip configuration (above).

Drysuit Zip Information

Summary of Contents for Divemaster Commercial

























Reviews: