Northern Diver Divemaster Commercial Manual Download Page 5

Contact Northern Diver    |  +44 (0) 1257  25 44 44  |  [email protected]  |  www.ndiver.com

NDiver Drysuit Manual  |  East Quarry, Appley Lane North, Appley Bridge, Wigan, WN6 9AE, UK 

5

This manual describes all types of Northern Diver neoprene drysuit styles. All 

suits share several basic features, including the main waterproof zip, inflation and 

exhaust valves, low-pressure inflator hose, vulcanised neoprene boots or socks, 

neoprene hood, and storage bag/changing mat. Each model is equipped with a 

specific maintenance kit.

Neoprene

Neoprene suits are constructed from compressed foam neoprene, laminated 

on both sides. The exterior side is a heavier weave to better withstand wear 

and abrasion, while the inside is designed for comfort and heat reflection. The 

compressed foam neoprene is very dense, resisting compression at depth. This 

means the suit loses a smaller percentage of its surface buoyancy, requiring less 

air to be added via the inflation valve to remain neutrally buoyant. Neoprene also 

retains more thermal efficiency at depth, unlike tri-laminate material, neoprene 

has inherent thermal protection and buoyancy within the material structure and 

generally requires less added insulation worn under the suit than the 

tri-laminate, for most conditions. Every seam receives an application of three coats 

of neoprene adhesive. The outside is sewn with a two thread locking blind stitch, 

while the inside is reinforced with a proprietary liquid polymer that penetrates the 

interior nylon layer and fuses to the neoprene itself. This creates a tough and long 

lasting waterproof seam.

The neoprene drysuits are tested to EN 14225-2:2017 and meet the regulation 

(EU) 2016/425 of The European Parliament and of the Council.

Notified Body No: 2452

Vojenský technický ústav, s.p.

odštěpný závod VTÚPV

Víta Nejedlého 691

682 01 Vyškov

Czech Republic

The EU Declaration of Conformity can be found on the Northern Diver (Int) Ltd 

product pages in the download section, please visit our website:

www.ndiver-commercial.com/trilaminate-suits

WARNING

NEVER DEPEND ON ANY DRYSUIT AS YOUR SOLE SOURCE OF FLOTATION 

AND BUOYANCY CONTROL. ALWAYS DIVE WITH A SUITABLE BUOYANCY 

CONTROL DEVICE EQUIPPED WITH A SEPARATE INFLATION SYSTEM.

All of our brochures and manuals are available in various languages 

upon request and can be supplied on memory sticks or as a download 

from our website - 

www.ndiver.com

Key Specifications

Summary of Contents for Divemaster Commercial

























Reviews: