WARNING
• STOP using when a pet can climb over or dislodge the gate.
• Install only with locking/latching mechanism securely engaged.
• To prevent falls, never use at top of stairs.
• This product will not necessarily prevent all accidents.
• NEVER leave pet unattended.
• This gate is to be used in openings 26" to 42" (66 cm to 106 cm) only.
• Periodically check all fasteners to be sure they are tight and secure, stop using
gate if any parts are missing or become damaged.
• Do not attempt to use this gate in temperatures less than 40 degrees F (4˚C)
or damage may result.
Page 2
Your safety gate contains the following:
x1
A
A. Preassembled Gate
To ensure safe operation, additional or replacement parts should be obtained only from North States or
its authorized distributors. Contact information appears on the cover of these instructions. Replacement
parts can be ordered at www.northstatesind.com
Any damage to property during installation of your safety gate is the sole responsibility of the end user.
Installation and Operating Instructions
Step 1
No Tools Required
Place the gate on floor and expand it so that all four bumpers are in contact with the sides
of opening.
Step 2
Rotate locking handle and insert handle tab into slot that provides enough tension to
secure gate.
Step 3
To release locking handle, twist handle outward and pull gently away from gate.
Clean with water and non- abrasive cleaner. Rinse with water and allow to air dry.
