F
G
B
B
distances should
tension nuts
tighten inward
gate
tighten inward
Step 4
Tighten oth o the ottom tension nuts
y
( )
( )
turning them cloc wise at the same tim
B
Tighten both of the upper tension knobs (4C) by turning them clockwise at the same time until the
gap between the gate and upper right corner come together, leaving a .060"- .078" gap (4D).
Use the wrench provided to ease turning the tension knobs (figures 4E, 4F).
.
1.
Rotate the loc ing handle to the vertical position.
2.
epress the release utton as shown.
3.
Li t the door up until it swings reely.
4.
Swing the door open in desired direction.
Operation
1.
Simply release the gate and allow it to swing closed (unless the Stay Open eature is used).
2.
To latch, rotate the loc ing handle to hori ontal position, as shown in Figure B. This e ectively “triple latches the gate.
ote: Veri y proper gate installation y partially opening and releasing it.
The door will swing closed and dou le latch automatically.
Opening the Gate Locking System (Figure 5A):
Closing and Latching the Gate (Figure 5B):
Page 4
(approx. the
To
the gate
switching the side part
handle to
position.
,
