5
Installation Steps
Step 2 - Make Hole For Filtered Water Faucet (not included)
Step 3 - Install Faucet (not included - North Star faucet shown)
IMPORTANT:
To avoid damaging the sink, consult a qualified plumber or installer for drilling procedures
in porcelain or stainless steel. Special drill bits are made for this.
1. Select one of the following places to install the faucet. Be sure there's room underneath so you can
make the needed connections.
•
In an existing sink spray attachment hole.
•
Drill a hole in the sink top.
•
Drill a hole in the countertop next to the sink.
2. If drilling is needed make a 1-1/4" dia. (minimum) hole for the faucet.
Fig. 3
hole in sink
or countertop
tubing adaptor,
7/16-24 thd. to 3/8” Q.C.
faucet
base
o-ring
slotted
washer
spacer
lock washer
hex nut
3/8” tubing from
water filter outlet
