![North Star NSDW500 Installation And Operation Manual Download Page 3](http://html1.mh-extra.com/html/north-star/nsdw500/nsdw500_installation-and-operation-manual_1707983003.webp)
3
Parts of the System
Materials and Tools Needed
Typical Undersink Installation
•
filter system assembly
•
filtered water faucet for sink or countertop mounting
•
3/8" tubing to make all needed connections
NOTE:
Gather the required tools before starting installation. Read and follow
the instructions provided with any tools listed here.
•
filtered water faucet for sink or countertop mounting
•
slotted and Phillips screwdrivers
•
pliers and adjustable jaw wrench
•
tubing cutter
•
electric drill and 1-1/4" drill bit if mounting hole is needed for the faucet
IMPORTANT:
To avoid damaging the sink, consult a qualified plumber or
installer for drilling procedures in porcelain or stainless steel.
Locate the water filter housing on the cold water supply pipe, under the kitchen and/or bathroom sink, to
filter the cold drinking water. Refer to the following drawing.
shutoff valve
filtered water faucet
(not included)
Filter 2
(post filter)
Filter 1
(pre filter)
Blue
WATER
OUT
Yellow
WATER
IN
water supply
fitting
SINK
NOTE:
Be sure to allow a minimum space of 1-1/2" under the system
for removing the filter cartridges, in order to change the cartridges.
Fig. 1
4-1/4”
HOT
COLD