Operation - Using the Sprayer (continued)
24
5. Remove fill
cap
Remove the fill cap located on top of the sprayer.
6. Ensure tank
flushed
Ensure tank is flushed of all chemicals from prior uses
.
- Chemicals can interact dangerously when mixed, and residue chemicals are also a
health hazard.
7. Fill tank
Add pesticide to tank through fill cap:
a)
Confirm the chemical/water dilution ratios specified on the chemical label.
b)
Determine chemical and water volumes needed for the planned application,
taking into consideration that maximum tank capacity is 55.
Note: Only purchase and mix as much chemical as you need for the planned
application in order to minimize chemical over application and the need for
storing unused chemicals.
c)
Add chemical to the tank through the fill cap.
If the chemical is not pre-mixed, add water and pesticide concentrate in the order
prescribed on the label.
8. Ensure
chemical
mixed
Ensure chemical is thoroughly mixed in tank.
- Stirring device should be made of metal or plastic, non-chemical absorbing
material, and then properly cleaned and stored after use.
9. Replace fill
cap
Replace fill cap and tighten securely
.
Fill cap
