North Star CutoMato 51, Instruction Manual, Page: 5 / 22

-5-
„
Do not install the plastic ejector if you intend to cut an especially soft or squashy
vegetable or fruit (such as a tomato).
„
Install the slicing blade (part No. 24) in accordance with the cutting plate (see
picture 3.3).
Note : always make sure (by touch) that the blade adapter will be in its designated
place, on the main axis.
„
Install the blades frame (part No. 23) as shown in pictures 3.4 and 3.5. Ensure
contact between front leading points on sliding surface frame (green bushing – part
No. 27), and the lower side of the adapter bushing of the frame (part No. 23A) to
the horizontal dynamic leading rod (part No. 28).
„
Notice : the frames are installed gradually. Initially place the lower frame. Note
that frames are identical. Note that you can obtain sticks by installing
frames only – without using the slicing blade. Slices can be obtained by
using the upper frame only.
Warning!
„
Assembly and disassembly of components will always be done without exerting
any force .
„
It is forbidden and undesired to draw fingers near any of the blade types.
„
Always act gently and with consideration.
Option # 3
1. Prepare the pushing system : using this method, products are pushed in with the manual
pusher (part No. 9) or without it at all – the vegetable is pushed into the blades by its own
weight (a cucumber for example).
Fig. 3.3
24
Fig. 3.5 Fig. 3.4
23A
28
27
23