Installation—2681101 and 26812101
15
Step Seven: Install rubber grommet (784519) into hole in
tank
Apply soap to rubber grommet.
Press grommet into the 9/16" hole in the sprayer
tank. Ensure the bottom lip of the grommet is fully
through the hole, and the top lip is flush with the top
of the tank.
Step Eight: Reinstall pump onto
sprayer
Apply soap to bypass fitting on
regulator.
Press bypass fitting into the
grommet.
Reinstall four screws through
pump feet and into threaded
holes in the tank.
Step Nine: Reinstall hoses
Install fitting on inlet hose into
inlet port of the pump. To insert
quick connect fittings, lubricate
O-ring with water and twist
fitting while inserting into
pump port. Slide red QC clip
closed.
Install gun hose onto 3/8" HB
elbow fitting in the outlet port
of the regulator. Secure with
hose clamp.
Install broadcast hose onto 3/8"
straight HB fitting in the 1/4"
NPT port of the regulator.
Secure with hose clamp.
Continue to page 22.
