21
III.) Changing the Pump Oil
1.)
Place an oil pan or container beneath the pressure washer cart.
2.)
Drain the old oil by removing the oil plug found under the pump.
3.)
Replace the oil plug.
4.)
Remove the vented dipstick
and fill with oil until half way up the sight
glass.
5.)
Use a NON-DETERGENT SAE 30W oil (Item# 4043).
6.)
Replace the vented dipstick.
IV.) Cleaning and Changing the Nozzle Orifice
The nozzle orifice has a small hardened stainless steel body. It is located inside
the adjustable nozzle between the two thin metal plates. Follow these steps to
remove the nozzle orifice.
1.)
Pull the adjustable nozzle back and
turn counter-clockwise spreading the
metal plates.
2.)
Remove the nozzle orifice by
unscrewing with a 2mm allen wrench.
3.)
Clean the nozzle by blowing with air.
4.)
Replace the nozzle orifice if it is worn.
O il Fill
Sightglass
