15
Start-Up Instructions
IV.) Turn the Water Supply ON
Make sure the hose is not “kinked”. A kinked hose will provide insufficient water
supply to the pump and will reduce its life. Make sure the hose remains unkinked
after moving the pressure washer.
V.) Squeeze the Trigger
Squeeze the trigger until a steady flow of water sprays out the nozzle. Make
sure all the air is out of the hoses before running the pressure washer. This step
is very important, it will prolong the pump’s life. NEVER run the pump dry.
You can change between high and low pressure by pushing or pulling the
adjustable nozzle. Pull the nozzle back for high pressure. Push the nozzle
forward for low pressure. Low pressure is used for spraying chemicals.
VI.) Start the Engine
Refer to the engine manual to start your engine. Once the engine is started,
begin cleaning.
If the engine doesn’t start on the first pull, pressure may build up in the pump.
Relieve the pump pressure by squeezing the spray gun trigger. This will make
starting easier.
high pressure
low pressure
