background image

 

10

Skin puncture hazard. 

 

High pressure fluid can inject under skin resulting in serious injury including 

amputation.  Do not direct spray at people or animals.
-If skin injection happens, seek IMMEDIATE surgical treatment. 
-Do not check for leaks with hand.  Instead, use a piece of cardboard to check for 

leaks. 

-Do not use unit if exterior hose damage is evident.  Make sure all fittings are tight 

before starting.  Relieve system pressure before servicing. 

-Know how to stop engine and bleed pressures quickly.  Be thoroughly familiar with 
the controls.
-Make sure accessories meet the unit's temperature and  pressure limits.
-Stop engine and bleed pressures before leaving unit unattended.

 

WARNING

 Operation Instructions 

 
Water Supply 

1.) Make sure water supply is clean.  Debris can cause excess pump wear and reduce 

performance. 

2.) An insufficient water supply will damage your pump.  Make sure the water supply is steady and 

is 20% over the rated flow of your pump.  Use a stopwatch to time how long it takes to fill a 5 
gallon bucket with your garden hose.  The bucket must be filled in less than 125 seconds. 

3.) The water supply garden hose must have an inside diameter of at least 5/8”.  If the hose is more 

than 100 ft. long, the diameter must be at least 3/4”. 

4.) Never use a reservoir tank as a water source.  Drawing water out of a tank may cause pump 

cavitation and damage to your pump.  This pressure washer is designed for a pressurized water 
source such as a city water faucet. However, the water source pressure must not exceed 115 
psi (8 bar). 

5.) Always use a flexible rubber hose for your water supply.  Do not use rigid piping. 

 

Start-Up Instructions 

 

1.) Attach garden hose to water inlet. 

 

2.) Attach pressure hose to water outlet and spray gun. 

 

3.) Attach spray gun to lance. 
4.) Turn water supply ON. 
5.) Squeeze trigger to purge air from water pump. 
6.) Start engine. 

 

Shut-Down Instructions 

1.) Turn engine OFF. 
2.) Turn water supply OFF. 
3.) Squeeze trigger to relieve system pressure. 
4.) Remove garden hose. 
5.) Remove pressure hose.

 

 

Summary of Contents for 157477


















Reviews: