5
Table light
Unpack the box, lay the parts on a soft surface and make sure that they are
undamaged. Wait until the light is completely assembled before plugging it in.
5. Screw in a light bulb (max. 60 W, E27) and
then screw on the diffuser (1).
6. Carefully fit the rattan shade (3) on from the side,
push the locking ring (4) up against the rattan
shade and screw in the locking screw (5).
1. Screw the tube (6) and lamp holder (2)
together.
2. Screw the lamp holder and tube assembly
onto the base (7).
3. Screw in a light bulb (max. 60 W, E27) and
then screw on the diffuser (1).
4. Carefully fit the rattan shade (5) on from the side,
push the locking ring (3) up against the rattan
shade and screw in the locking screw (4).
The light does not have an on/off switch so it can
only be switched on/off at the socket, by using a
timer or simply by unplugging it.
