1 4
important that when you come to the North Control System not to grab hold of it. Instead, continue
to move towards the kite until you reach the leading edge and can secure the kite.
3.2.2. RESETTING THE SINGLE LINE FLAG LANDING LINE
Once you have recovered all equipment safely, you will need to reset the landing line to use it again.
1.
Lay out your lines as if you were going to attach them to your kite, by separating each
individual line parallel to one another.
2.
Make sure all lines are running freely and are not tangled.
3.
To reassemble the quick release system, push the end of the Modular Harness Loop back
into the main body of the North Connect until you hear it click.
4.
Then ensure the landing line is pulled back into place so the ring is touching the bottom of
the quick release body again.