Wave II Monitors
Specifications subject to changes without prior notice. The contents of
this page are property of North Invent Norway AS. All rights herein are
reserved to North lnvent Norway AS. This document cannot be
reproduced without the written permission of the company.
NORTH INVENT
Sørhauggata 128, NO-5527 Haugesund, Norway
Phone: + 47 48 84 02 00
[email protected] www.northinvent.com
4
2. Monitor Description
The Wave II monitors are a series of rugged TFT LCD Display Monitors available in 18,5", 19", 21,5", 24", 27" and 32"
display sizes. All of our Monitors built following a modular approach and can be console mounted or equipped with stand
(hinge).
Each Monitor is constituted by the following set of components:
Display Unit (DIU). Front end of the monitor consisting of the glass (optionally: touch) and displaypanel in the aluminium
frame.
Electronics Unit (ELU). Back end of the monitor consisting mainly of powersupply and controllerboard.
DIU and ELU are modular and easily separable in order to ensure efficient configuration, maintenance and repair.
Optional accessories such as hinge (tiltable stand), panel mounting kits and HMI units (operator panels).
Each Monitor presents the following materials and features:
The Front, Display Frame and Cover are made of Marine Grade Aluminium allowing to reduce weight while eliminating
corrosion problems.
The electronic set of components includes a specifically designed Power Supply, a high quality Display Controller, a
Backlight LED driver and a custom-made Interface Board.
The Wave II Monitors use identical Power Supply which can be supplied with 90-264 VAC, 18-36 VDC or as a
multipower combination depending on configuration. The Wave II Monitors come with DVI, Display Port, RS232, 2 x
USB, LAN, HMI port and SD slot. Optionally you can get a second DVI, DVI out, a second Display Port, a second LAN
and 2 x RS422/485.
Pixel pitch on all displays varies from 0,213 to 0,311 mm both in x and y direction depending on the display size (see data
sheet). Pixel pitch equals 1.07 m viewing distance with a viewing angle of 1 minute of arc as required in IEC 62.288
section 7.5.1 for the 27" monitor, 0.96 m for the 24" monitor, 0.86 m for the 21" monitor, 1.02m for the 19” monitor and
0.74 m for the 18,5" monitor. Nominal viewing distance in a normal environment is 1.0 m.
Each Monitor complies with the following international Standards and Requirements:
All our Monitors has been tested by the Danish accredited testing bodies EKTOS TRS and DELTA (Danish Electronics,
Light & Acoustics), and found to comply with the requirements of the International Association of Classification Societies
(IACS) as well as the selected requirements of IEC 60945, IEC 60533, IEC 60529 and selected MIL standards.
The 19", 21ʺ, 24" and 27" Wave monitors are also tested according to IEC 62288, IEC 62388 and IEC 61174 and thereby
ECDIS approved.
All our Monitors are approved in compliance with the international standard IEC 60945 : 2002 (Clause 4.4 Equipment
category b, protected from the weather (formerly class B)), Maritime navigation and radio communication equipment and
systems - General requirements - Methods of testing and required test results.
