Model 5330 Programming
Address Switch:
The rear panel of the Model 5330 contains a 5-position DIP-Switch for setting the IEE-488 bus address of the device.
The switch is continuously monitored by the control microprocessor in the Model 5330 and changes to this switch may be
done with device power on.
The switch is configured as binary value of basic bus address, least significant on right as viewed from the rear panel.
For each switch actuator, the UP position represents a binary 1 value for that bit position.
For example:
The following represents address 5
DN DN UP DN UP
0 0 1 0 1
The Model 5330 can be programmed for emulation of the
North Atlantic Model 5310
or the
ILC Data Device Corp
Model SIM-31200
. The Model 5330 may be configured to emulate the interface language of these products. Once
configured, the Model 5330 will power up with selected language emulation activated.
Language emulation option is set at the factory prior to shipment. Standard MATE language may be temporarily
activated with an IEEE-488 command string as shown in the Table below:
Language Emulation
Model
Emulation Command String
5330
Set at Factory
5330 TEMP
*
LANG<sp>TMATE<cr><lf>
5310
Set at Factory
31200
Set at Factory
*
Temporarily switches to Model 5330 standard MATE language,
but returns to previous factory set language emulation at next
power up sequence.
North Atlantic Industries, Inc.
.
631.567.1100/631.567.1823 (fax)
04-23-02
5330A001 Rev B1.0
170 Wilbur Place, Bohemia, NY 11716
www.naii.com
/ e-mail:[email protected] Cage Code: OVGU1
Page 6 of 8
