IP-POE24M Hardware Installation Manual
- 18 -
After taking off the cover, put it horizontally and avoid it being crushed or damaged.
Otherwise, the chassis will be hard to install.
4.2 Closing Chassis
The section mainly describes how to put the cover and close the chassis. Do as
follows:
Assemble them according to their locations and joint them together along
their sides.
See the following figure.
When the cover and the bottom are closed, let the cover slide the slot of
the front template at the bottom.
Nail the bolt and screw it tightly with the screwdriver.
Reinstall the switch on the cabinet or the desk.
Reconnect all cables of the switch.
