IP-POE24M Hardware Installation Manual
- 11 -
through a console cable, you can configure and monitor the switch of IP-POE24M by
running a terminal emulation software, such as super Windows terminal. The cable is
provided according to the host. The communication parameters of the terminal serial
port can be set to a rate of 9600bps, eight data bits, one stop bit, no sum check bit and
traffic control.
The RJ45 connector of the console port is shown in the following figure. The RJ45 plug
corresponds to the RJ45 socket, whose pins can be aligned from left to right with the
value from 1 to 8.
Figure 3-3 RJ-45 connector of the console port
Figure 3-4 Connecting the console port of IP-POE24M and computer
Table 3-1 Definition of the pins of the UTP port
No.
Name
Symbol
Remarks
1
Carrier Detecting
CD
No connect
2
Data receiving
RXD
Input
3
Data-line device ready
DSR
No connect
