Nortel Regular Telephone User Manual Download Page 13

11

Regular telephone

To cancel Forward:  

1

Lift the handset.  

2

If you have a pushbutton
telephone, dial #1 or CFWA FFC.  

or

If you have a rotary dial telephone,
dial SPRE  74 or CFWA FFC.  

3

Hang up.  Calls come in to your
phone as usual.  

Notes:  

• You will hear a fast, busy signal if 

you dial a code which isn’t allowed 
or if you dial a number with more 
than the maximum number of digits
allowed.  

You can still make calls from your
telephone while using Forward.  

Forced Charge Account

Use Forced Charge Account to make
and charge long distance calls from a
phone that normally is restricted from
making long distance calls.  The calls
will be charged to your department,
office or project.  

To use Forced Charge Account:  

1

Lift the handset.  

2

Dial the SPRE  5 or CDRC FFC.
The dial tone stops.  

3

Dial the charge account number.
You hear dial tone. 

4

Dial the phone number.  You hear
ring back or busy signal.  

Notes:  

The charge account number must
be entered for each long distance
call.  You can transfer or
conference a call made using
Forced Charge Account.  

If you have a rotary dial telephone
telephone, you must use a charge
account number with the
maximum number of digits
specified for your organization.  If
you have a pushbutton telephone,
you can use a number which has
fewer than the maximum number
of digits by pressing the # key at
the end of the number.  

Summary of Contents for Regular Telephone




























Reviews: