Nortel Passport 8250, Command Line Interface Manual

Page: 34 / 94

34 Chapter 3 Provisioning ports and connections
241-5101-201 R2.2
Procedure
1 Ensure that you are accessing the correct service board number.
See “Accessing a board in the CLI” (page 24) for information on changing
board numbers.
2 View the port configuration settings for the ports on the service board:
portconfig
Example
The following is an example of displaying the existing port configuration
settings for all DS-1 ports on service board 2.
[Edgeplex CLI]: 2
[T1-2]: portconfig
1 LineType= ESF LineCoding= B8ZS SignalMode= NONE
Status= 1
2 LineType= ESF LineCoding= B8ZS SignalMode= NONE
Status= 1
3 LineType= ESF LineCoding= B8ZS SignalMode= NONE
Status= 1
4 LineType= ESF LineCoding= B8ZS SignalMode= NONE
Status= 1
32 Near end LOF
64 Near end loss of signal (LOS)
128 Near end is looped
256 E1 TS16 AIS
512 Far end sending TS16 loss of multiple frames (LOMF)
1024 Near end sending TS16 LOMF
2048 Near end detects a test code
4096 Line status not defined
Table 4 (continued)
Status command parameter
Number Definition
(Sheet 2 of 2)