Installing and Operating the Passport 2430 Multiservice Access Switch
3-4
308224-B Rev 00
To run Quick-Start:
1.
Enter the following command to run the Quick-Start script:
run inst_pp2430.bat
The Quick-Start script begins running.
2.
Respond to the prompts, using your worksheets.
describes the commands that you use to interact with the
Quick-Start script.
The script prompts you for the following information in the order given:
a.
Initial Global Worksheet information
b.
Specific protocol information
c.
WAN protocol selection
d. Specific protocol information
e.
The rest of the Global Worksheet information
After you enter all of the Global Worksheet protocol information, the script
displays a configuration summary and prompts you to save the configuration
to a file.
Table 3-1.
Quick-Start Commands
Task
Action
Details
Accept the default value.
Press Return.
Your console displays default values in
brackets, for example, [E11].
Repeat a step to make a
correction.
Press Control-c.
Press n.
When prompted, “Terminate script y/n?”
press the n key. You return to the
beginning of the step so that you can
reenter the information.
Stop the Quick-Start
installation script.
Press Control-c.
Press y.
When prompted, “Terminate script y/n?”
press the y key. The procedure is
terminated and you return to the
Technician Interface prompt.
To restart the Quick-Start procedure, you
must reboot the router by entering
boot
.
