Nortel Passport 2430, Installing And Operating Instructions

Page: 44 / 126

Installing and Operating the Passport 2430 Multiservice Access Switch
1-22
308224-B Rev 00
4.
Connect the DB-9 end of the cable to the communication data port on the
laptop PC
(Figure 1-17) .
Figure 1-17. Connecting a Laptop PC to a Passport 2430
Connecting a Terminal Console
To connect a terminal console to the Passport 2430, make sure that you have the
RJ-45 to DB-9 cable that was shipped with the Passport 2430 and a DB-9 to
DB-25 adapter, then complete the following steps:
1.
Turn on and configure the terminal, using the parameters in Table 1-2
and the terminal user guide.
2.
Insert the blue RJ-45 receptacle end of the console cable into the blue
Passport 2430 console connector.
3.
Attach the DB-9 receptacle connector to the DB-9 end of the adapter.
Table 1-2. Terminal Console Parameters
Parameter Value
Baud rate 9600
Data bits 8
Stop bits 1
Parity None
1 2
Passport 2430
Run
Boot
Fail
VLK0009A
Flash
1
2
l
O PCMCIA
Modem