Nortel Passport 15000, Hardware Installation And Maintenance, Page: 33 / 874

33
Passport 15000, 20000 Hardware Installation, Maintenance, and Upgrade 5.2S2
About this document
This document contains the procedures that are called up in sequence by
specific task flows. Task flows identify at a high level what is to be done to get
a unit or series of units of Passport 15000 or 20000 hardware installed or
replaced.
The following topics are discussed in this section:
• “Who should read this document and why” (page 33)
• “How to use this document” (page 34)
• “What’s new in this document” (page 34)
• “Related documents” (page 46)
• “How to get more help” (page 47)
Who should read this document and why
This document is intended for use by field technicians who:
• are qualified to work on the dc electrical power feeds to the
Passport 15000 or 20000 according to local electrical codes for the kind
of power hookup required
• are qualified to handle cards or modules that plug into a Passport 15000
or 20000 without accidently affecting service or to handle, install, or
replace mechanical switch hardware and associated equipment without
causing personal injury or damage to equipment
• have experience and knowledge of the safe and practical operation of the
specialty tools and methods required to do the tasks identified in the
procedures throughout this document