17
.
Setup and assembly
This section describes the setup and assembly for the Nortel IP Phone
Key Expansion Module (KEM) and the Nortel IP Phone Graphical
Expansion Module (GEM).
Setup and assembly for the KEM
Nortel IP Phone Key Expansion Module (KEM) mounts on the right side of
the IP Phone as shown in
Figure 6 "KEM attached to an IP Phone 2002"
(page 17)
. A desk-mount bracket and a structural baseplates are provided,
to secure the KEM to the IP Phone.
Figure 6
KEM attached to an IP Phone 2002
KEM attaches to the IP Phone or another KEM through the accessory
expansion module (AEM) interface.
Extending from the left side of the KEM is a 10-pin female header on a
ribbon cable that is connected to inside of the module. Use this ribbon
cable to:
Carrier VoIP
Nortel IP Phone Expansion Module User Guide (CICM)
NN10300-011
09.01
Standard
4 July 2008
Copyright © 2008 Nortel Networks
.
Summary of Contents for NN10300-011
Page 27: ......
