Nortel Meridian Meridian 1, Planning, Installation And Operating Instructions

Page: 171 / 556

Page 152 of 536 Chapter 16 – Starting up and testing the system
553-3121-210 Standard 3.0 January 1999
10 Review ISM parameters.
Note: On a new installation, the ISM parameters displayed on the
terminal screen will be the default settings associated with the Feature
Set selection. These settings can be accepted without changes or
changed to suit the requirements of the new system.
Current ISM Parameters:
TNS (0048) (number of terminal numbers)
AGNT (0128) (number of ACD agents)
ACDN (300) (number of ACD DNs)
AST (0000) (number of associate Sets)
DSL (0000) (number of Digital Subscriber Loops)
LTID (0000) (number of Logical Terminal IDs)
MOPT (0000) (Meridian Mail option)
Do you wish to change ISM parameters?
n<cr>
(no change)
y<cr>
(change)
a<cr>
(abort, return to main menu)
If the response was y
proceed with
Step 11
the response was n
proceed with
Step 13
11 Select ISM parameters.
(example)
Enter new ISM parameters, <cr> to leave as is:
TNS (0048) 64<cr> (change)
AGNT (0128) <cr> (no change)
ACDN (300)
<cr> (no change)
AST (0000) <cr> (no change)
DSL (0000)
<cr> (no change)
LTID (0000) <cr> (no change)
MOPT (0000)
<cr> (no change)