Browser User Interface
23
Nortel Integrated Conference Bridge Professional
Administrator Guide
The
ICB Professional Install Wizard
window opens to the
Basic
System Settings
panel, as shown in following figure.
Figure 7: Install Wizard
Basic System Settings panel
3
In the
System Name
field, enter up to 15 characters of
alphanumeric text for the system's name.
The
IP address
field is a read-only field that shows the IP address
of the system. Users define the system address using the CLI.
4
In the
Signalling Protocol
field, is a read-only field specifying the
telephony connection by E1/T1 trunk.
5
In the
Default Language
field, select the default voice-prompt
language for conferences and the TUI. When scheduling a
conference, users can select a language from the available set.
However, if the user does not specify a language, this parameter
applies. The default is American English.
6
In the
IP address of E-mail Server
field, enter the IP address of the
server that the ICB Professional uses to send scheduling
confirmation and to administer e-mail messages. If this field is
empty, or specified incorrectly, the ICB Professional does not send
e-mail messages. However, the rest of the system operates
properly.
Note:
The ICB Professional system uses SMTP. The e-mail server
must support this protocol.
