6
2
Verify that the GBIC is the correct model for your network
configuration (
Table 1 on page 4
).
3
Remove the dust cover from the GBIC’s optical bores.
4
Grasp the GBIC between your thumb and forefinger.
5
Insert the GBIC into the slot on the front panel of the Gigabit
Ethernet switching module
(Figure 3)
.
Figure 3
Inserting the GBIC into the switching module
Removing a GBIC
This section lists the steps for removing a GBIC.
To remove a GBIC:
1
Disconnect the network fiber cable from the GBIC
connector.
Note:
GBICs are keyed to prevent incorrect insertion.
CWGBIC.fm Page 6 Wednesday, December 12, 2001 11:26 AM
