Restriction services
≤°‡¤
Cancel
≤£°‡¤
Turn on one of six schedules for alternative restrictions on particular lines or
telephones from a designated control telephone. You are required to enter the
System Coordinator password.
Routing services
≤°‡‹
Cancel
≤£°‡‹
Turn on one of six schedules for alternative routing on particular lines or
telephones from a designated control telephone. You are required to enter the
System Coordinator password.
≤‚
Dial an external telephone number using a three-digit code. There are two types
of speed dial codes: system (001 to 255) and user (256 to 279). System speed
dial codes can be used from any Norstar telephone in the system. They are
assigned by your system coordinator.
User speed dial codes are used exclusively at your telephone.
To make a call using a speed dial code:
1. Press
≤‚
.
2. Enter the three-digit code for the number.
To program User Speed Dial numbers:
1. Press
≤•›
.
2. Enter a three-digit code from 256 to 279.
3. Specify the external line by pressing a line button, a line pool button, or the
intercom button. If you do not specify the line, the system automatically chooses
a line for the call.
4. Dial the telephone number you want to program (up to 24 digits).
5. Press
≥
.
6. Record the code and number you have just programmed.
≤°‚fl
Cancel
≤£°‚fl
Change the first line of the display to the current time and date.
≤•°‹⁄
Turn System Answer on or off. You must enter the System Coordinator or Basic
password.
≤°‚fi
Test the telephone display, buttons, speaker, handset or headset (if available) and
power supply. See the System Coordinator Guide for further instructions.
≤°‚‹
Briefly display the time and date while you are on a call.
≤••ÊȘ‰
Enter a password provided by your system coordinator to change the time and
date on all sets with a display in your Norstar system.
Speed Dial
Note: You
cannot
program user
speed dial
codes if the
system
administrator
is performing
programming
on your
system.
Static time
and date
System
Answer
Test a
telephone
Time
Time & date
