Nortel Compact ICS 7.1 Coordinator Manual Download Page 187

Page: 187 / 266

Using the Hospitality features /

187

N0130955 01

Compact ICS 7.1 System Coordinator Guide

Turning off an alarm

When the alarm rings, the user can release the ring by doing one of the
following, depending on the type of telephone in the room:

Digital set: Press any button except

≥

Analog set: Lift and replace the handset.

≥

acts like a snooze alarm and will temporarily disable the alarm for a

programmed period. Refer to ‘‘Service times’’ on page 182.

If the user is on a call when the alarm sounds, they can press any button
except

®,

which would release the call instead.

Summary of Contents for Compact ICS 7.1











































































































































































































































































Search results

Summary of Contents for Compact ICS 7.1

Reviews:

Related manuals for Compact ICS 7.1

Brands by name

Popular brands

Nortel Compact ICS 7.1, Coordinator Manual

Search results

Summary of Contents for Compact ICS 7.1

Reviews:

Related manuals for Compact ICS 7.1

Brands by name

Popular brands