214390-A
10
[Draft Level—Nortel Confidential]
Setting IP parameters
For the initial setup of a standalone switch, you must set the following IP parameters:
•
IP address of the switch
•
Subnet mask
•
Gateway address.
To set the IP parameters:
1
Connect a terminal to the Console port on a standalone switch.
Set the terminal protocol as described in Using the BayStack 380-24F 1000 Switch.
2
Connect the switch to power.
3
After the Nortel Networks logo is displayed, press [Ctrl]-Y to display the Main Menu.
The screen displays the Main Menu for the switch.
Figure 2 BayStack 380-24F Main Menu screen
