Nortel ATM E3, Manual

Page: 23 / 30

Using the ATM T3/E3 PMC Module
313889-A Rev 00
1-7
To install the PMC module on the system processor card:
1.
Attach an antistatic wrist strap.
2.
Holding the PMC module with the connectors facing down, slide it into
the opening on the system processor card
(Figure 1-5) .
3.
Press down to seat the PMC module firmly in the sockets (Figure 1-5) .
Figure 1-5. Installing the PMC Module
Caution:
Electrostatic discharge can damage hardware. You must wear the
antistatic wrist strap whenever you handle printed circuit boards. Refer to the
instructions enclosed with your antistatic wrist strap to attach it.
T3E3002A
Sy
ste
m
Pro
ce
ss
or
A
T
M
T
3
/E
3
SY
NC
OO
F
AIS
RA
I
RX
TX