Nortel ATM E3, Manual

Page: 19 / 30

Using the ATM T3/E3 PMC Module
313889-A Rev 00
1-3
Figure 1-1. Shipping Contents
Preparing to Install the ATM T3/E3 PMC Module
Before beginning the installation, verify the following:
• You have the proper equipment and tools; see “Tools and Cables” on page 1-4 .
• You have the communications devices and the cabling that you need to attach
to the PMC module; see
“Tools and Cables” on page 1-4 .
• The PMC input and output cable interface is AC or DC coupled as
appropriate; see
“Setting AC or DC Coupling” on page 1-4 .
Antistatic wrist strap
Four panhead screws
Two 75 ohm mini-SMB
coaxial adapters
T3E3001