Nortel Alteon OS, Command Reference Manual

Page: 208 / 382

Alteon OS Command Reference
208
„
Chapter 6: The Configuration Menu 40M2420, April 2007
/cfg/port
<port alias or number>
Port Configuration
Use the Port Configuration menu to configure settings for individual switch ports, except the
management port (MGT). This command is enabled by default.
[Port INT1 Menu]
gig - Gig Phy Menu
aclqos - Acl/Qos Configuration Menu
8021ppri - Set default 802.1p priority
pvid - Set default port VLAN id
name - Set port name
dscpmrk - Enable/disable DSCP remarking for port
tag - Enable/disable VLAN tagging for port
tagpvid - Enable/disable tagging on pvid
fastfwd - Enable/disable Port Fast Forwarding mode
ena - Enable port
dis - Disable port
cur - Display current port configuration
Table 6-25 Port Configuration Menu (/cfg/port)
Command Syntax and Usage
gig
If a port is configured to support Gigabit Ethernet, this option displays the Gigabit Ethernet Physi-
cal Link Menu. To view menu options, see
page 210 .
aclqos
Displays the ACL Quality of Service Menu. To view menu options, see page 211 .
8021ppri
<0-7>
Configures the port’s 802.1p priority level.
pvid
<VLAN number, 1-4095>
Sets the default VLAN number which will be used to forward frames which are not VLAN tagged.
The default number is 1 for non-management ports.
name <64 character string> | none
Sets a name for the port. The assigned port name appears next to the port number on some infor-
mation and statistics screens. The default is set to None.
dscpmark
Enables or disables DSCP re-marking on a port.
tag disable | enable
Disables or enables VLAN tagging for this port. It is disabled by default.