Nortel 5510 Engineering Manual Download Page 23

Page: 23 / 72

Filters and QoS Configuration for ERS 5500
Technical Configuration Guide

v2.0

NN48500-559

___________________________________________________________________________________________________________________________

External Distribution

The following table displays all various bucket size and duration values available using the
committed and maximum burst values used in this example.

Table 8: Meter Bucket Size and Duration

Bucket Size

Max burst rate

Committed rate

Duration

Value to enter

(mSec)

4,096 15000000

10000000

0.0065536

8,192 15000000

10000000

0.0131072

16,384 15000000 10000000

0.0262144

32,768 15000000 10000000

0.0524288

65,536 15000000 10000000

0.1048576

105

131,072 15000000 10000000

0.2097152

210

262,144 15000000 10000000

0.4194304

419

524,288 15000000 10000000

0.8388608

839

1,048,576* 15000000 10000000 1.6777216

1678

2,097,152* 15000000 10000000 3.3554432

3355

8,388,608* 15000000 10000000

13.4217728

13422

* ERS5530 10GE only

5.3 Interface Shaper

When configuring interface shaping, the shape rate, burst rate, and burst duration can be
configured using the following command:

•

5530-24TFD(config)#interface fastEthernet all

•

5530-24TFD(config-if)#qos if-shaper port <port #> shape-rate <64-10230000

Kbits/sec> max-burst-rate <64-4294967295 Kbits/sec> max-burst-duration <1-
4294967295 milliseconds>

QoS interface shaping parameters:

Parameter Description

Ports to configure shaping parameters.

<WORD>

Specify name for if-shaper; maximum is 16 alphanumeric characters.

shape-rate
<64-10230000>

Shaping rate in kilobits/sec; range is 64-10230000 kilobits/sec.

max-burst-rate
<64-4294967295>

Maximum burst rate in kilobits/sec; range is 64-4294967295Kbits/sec.

max-burst-duration
<1-4294967295>

Maximum burst duration in milliseconds; range is 1 to 4294967295 ms.

When configuring interface shaping on an interface, please note the following:

•

The maximum burst rate cannot be configured the same as the shape rate. You must
always specify a higher maximum burst rate than the shape rate

•

The maximum burst rate and burst duration is used to calculate the bucket size or
committed burst in bytes

•

The maximum burst rate and burst duration is used to calculate the bucket size or
committed burst in bytes

Duration = ((bucketSize*8) / (max-burst-rate – committed-rate))

•

Bucket sizes in bytes are 4K, 8K, 16k, 32K, 64K, 128K, 256K, and 512K

Summary of Contents for 5510









































































Search results

Summary of Contents for 5510

Reviews:

Brands by name

Popular brands

Nortel 5510, Engineering Manual

Search results

Summary of Contents for 5510

Reviews:

Brands by name

Popular brands