Filters and QoS Configuration for ERS 5500
Technical Configuration Guide
v2.0
NN48500-559
___________________________________________________________________________________________________________________________
Nortel Confidential Information Copyright © 2008 Nortel Networks. All Rights Reserved.
External Distribution
18
The qos queue-set-assignment queue-set <1-8> 1p <0-7> queue <1-8> command gives
the user the ability to specify the queue to associate an 802.1p priority. This command is
in the CLI priv-exec mode.
•
5520-24T-PWR(config)#default qos agent queue-set
The default qos agent queue-set command will default the egress CoS and QoS queue
set. The default CoS/QoS queue mode is 8. This command is in the CLI priv-exec
mode.
•
5520-24T-PWR(config)#show qos agent
The show qos agent command displays the current attributes for egress CoS and QoS
queue mode, resource sharing mode and QoS NVRAM commit delay. This command is
in the CLI priv-exec mode.
•
5520-24T-PWR(config)#qos agent nvram delay
The qos agent nvram delay command will modify the maximum time in seconds to write
config data to non-volatile storage. This command is in the CLI priv-exec mode.
•
5520-24T-PWR(config)#qos agent reset-default
The qos agent reset-default command resets QoS to its configuration default. This
command is in the CLI priv-exec mode.
Egress Queue Recommendations
If you are running all untagged traffic and do not change default port priority settings, use setting
1 CoS.
