Nortel 5000 Release Notes Download | Manualshive

Page: 12 / 54

background image

12

Important notices and new features

You can use the Ethernet Routing Switch 5600 Series switches as
stand-alone switches, in a hybrid stack with your existing Ethernet Routing
Switch 5500 Series switches, or in a pure stack of Ethernet Routing Switch
5600 Series switches.

The Ethernet Routing Switch 5600 Series switches provide more power
through optional power supply modules. For power supply options and
specifications, see Nortel Ethernet Routing Switch 5000 Series Installation
(NN47200-300).

For complete descriptions of the new switches and installation instructions
for the Ethernet Routing Switch 5600 Series, see Nortel Ethernet Routing
Switch 5000 Series Installation (NN47200-300).

Software features in release 6.0

Dual agent support

This feature provides support for two agents and configurations for either
Ethernet Routing Switch 5500 or 5600 Series pure stacks, or for mixed
stacks containing both products, however, Dual Agent Functionality is not
supported on the Ethernet Routing Switch 5510. The requirement is for the
Agent image to selectively boot the device using either agent specified.
In addition, the ability to specify when one agent image will become the
primary (immediate, next reboot, or scheduled reboot) will be available.

IGMPv3 snooping support

Release 6.0 supports basic IGMPv3 snooping.

PIM-SM

Release 6.0 supports basic multicast routing. PIM-SM is a licensed feature
which has been added to the existing Advanced License for the 5000 series.
PIM-SM only operates in stand-alone mode in this release.

Ethernet Routing Switch 5600 Series hardware that operates in stand-alone
mode, as well as Ethernet Routing Switch 5520 or 5530 switches in
stand-alone mode support PIM-SM. The Ethernet Routing Switch 5510
does not support PIM-SM.

IPv6

This feature provides management support for the switch or stack through
IPv6. Functionality includes IPv6 host access to the switch, as well as
access to a number of management functions over IPv6.

Many-to-many port mirroring (Ethernet Routing Switch 5600
Series only)

Release 6.0 supports many-to-many port mirroring on Ethernet Routing
Switch 5600 Series switches.

Nortel Ethernet Routing Switch 5000 Series

Release Notes — Release 6.0

NN47200-400

04.01

Standard

6.0

12 December 2008

Copyright © 2008., Nortel Networks

.

«
...
10
11
12
13
14
...
»

Summary of Contents for 5000























































Reviews:

No comments

Related manuals for 5000

Brand: GE Pages: 6

Brand: 2N Pages: 11

Brand: 2N Pages: 5

Brand: 2N Telekomunikace Pages: 24

IntelliJack NJ200

Brand: 3Com Pages: 4

Brand: Linksys Pages: 2

Brand: JB Systems Pages: 24

Brand: JB Systems Pages: 61

Brand: H3C Pages: 21

TeleCLIENT TC7730 Series

Brand: ETL Pages: 83

Brand: Comet Labs Pages: 11

Brand: Federal Signal Corporation Pages: 49

Brand: AMX Pages: 1

Brand: iDirect Pages: 72

Brand: UNICORECOMM Pages: 19

Brand: ADTRAN Pages: 161

Brand: TRENDnet Pages: 2

Brand: TRENDnet Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands