Nortel 4526FX Configuration Download Page 57

Page: 57 / 196

Configuring QoS Elements, Classifiers, and Classifier Blocks

Parameter

Description

src-ip <src-ip-info>

Enter the source IP address and mask in the
form of a.b.c.d/x for IPv4, or x:x:x:x:x:x:x:x/z for
IPv6.

Default is 0.0.0.0.

dst-ip <dst-ip-info>

Enter the source IP address and mask in the
form of a.b.c.d/x or a.b.c.d x.x.x.x for IPv4, or
x:x:x:x:x:x:x:x/z for IPv6.

Default is 0.0.0.0.

ds-field <0-63>

Enter 6-bit DSCP value; range is 0 to 63.

Default is ignore.

protocol <protocoltype>

Specify the IPv4 protocol classifier criteria;
range is 0 to 255.

src-port-min <port>
src-port-max <port>

Specify the L4 source port minimum value and
maximum value filter criteria.

dst-port-min <port>
dst-port-max <port>

Specify the L4 destination port minimum value
and maximum value filter criteria.

next-header

Specify the IPv6 next header classifier criteria;
range is 0 to 255.

session-id <sessionid>

Specify the IPv6 flow identifier.

The

qos ip-element

command is executed in the Global Configuration

command mode.

no qos ip-element command

The

no qos ip-element

command deletes IP classifier element entries.

The syntax for the

no qos ip-element

command is

no qos ip-element <1-55000>

Substitute

<1-55000>

above with the element ID.

The

no qos ip-element

command can be executed in the Global

Configuration command mode.

ATTENTION

An IP element that is referenced in a classifier cannot be deleted.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service

NN47205-504 (322816-

)

03.01

Standard

5.1

23 November 2007

Summary of Contents for 4526FX




































































































































































































Search results

Summary of Contents for 4526FX

Reviews:

Nortel 4526FX, Configuration, Page: 57 / 196

Search results

Summary of Contents for 4526FX

Reviews: