Nortel 4526FX Configuration Download Page 54 | Manualshive

Page: 54 / 196

Nortel 4526FX Configuration Download Page 54

54

Chapter 2 Configuring Quality of Service (QoS) with the CLI

Parameter

Description

•

ethertype specifies a value indicating the version of
Ethernet protocol being used.

•

eval-order specifies the evaluation order for all
elements with the same name.

•

flow-id specifies the flow identifier for IPv6 packets.

•

next-header specifies the IPv6 next-header value.
Values are in the range 0-255.

•

priority specifies a value for the 802.1p user priority.

•

protocol specifies the IPv4 protocol value.

•

set-drop-prec specifies automatic drop precendence

•

src-ip specifies the IP address to match against the
source IP address of a packet.

•

src-mac specifies the MAC source address of incoming
packets.

•

src-port-min specifies the minimum value for the Layer
4 source port number in a packet.

•

update-1p specifies an 802.1p value used to update
user priority.

•

update-dscp specifies a value used to update the
DSCP field in an IPv4 packet.

•

vlan-min specifies the minimum value for the VLAN
ID in a packet.

•

vlan-tag specifies the type of VLAN tagging in a packet.

set name [commited-rate]
[drop-nm-action] [drop-out-action]
[max-burst-rate] [max-burst-duration]
[update-dscp-out-action]

Creates the QoS Nortel SNA set.

Optional parameters:

•

commited-rate specifies the commited rate in Kbps.

•

drop-nm-action specifies the action to take when the
packet is non-matching. This action is applied to all
traffic that was not previously matched by the specified
filtering data. Options are

enable

(packet is dropped)

and

disable

(packet is not dropped).

•

drop-out-action specifies the action to take when a
packet is out-of-profile. This action is only applied
if metering is being enforced, and if the traffic is
deemed out of profile based on the level of traffic and
the metering criteria. Options are

enable

(packet is

dropped) and

disable

(packet is not dropped).

•

max-burst-rate specifies the maximum number of bytes
allowed in a single transmission burst.

Nortel Ethernet Routing Switch 4500 Series

Configuration — Quality of Service

NN47205-504 (322816-

B

)

03.01

Standard

5.1

23 November 2007

Copyright © 2007, Nortel Networks

.

«
...
52
53
54
55
56
...
»

Summary of Contents for 4526FX





































































































































































































Reviews:

No comments