Nortel 425-24T, Configuration Manual, Page: 268 / 488

268 Chapter 7 System configuration using the CLI
320985-A Rev 01
The
show config-network
command has no parameters or values.
Figure 97 shows the output for the
show config-network
command
.
Figure 97 show config-network command
ASCII Configuration Generator
The primary goal of the ASCII Configuration Generator (ACG) is to provide the
users of the Ethernet Switches 325 and 425 with a tool that allows them to easily
modify configuration of a particular switch or a stack.
ACG generates an ASCII configuration file which reproduces the behavior of the
current binary configuration file. The user can also rely on this function to
maintain backup configurations, as well as use it as a reliable method for
debugging the current configuration of a switch.
The Ethernet Switches 325 and 425 can download an editable ASCII
configuration file from the TFTP server. You can load the ASCII configuration
file automatically at boot time or on demand using console menus or CLI. Once
downloaded, the configuration file automatically configures the switch or stack
according to the Command Line Interface (CLI) commands in the file. The
maximum size for an ASCII configuration file is 100 KBs; larger configuration
files must be split into multiple files.
For more information on loading the ASCII configuration file automatically, see
“Automatically loading Configuration file” on page 266 .
The commands that are associated with ACG are:
• “show running-config command” on page 269
• “copy running-config tftp command” on page 270
425-48T(config-if)#show config-network
Auto-Load Configuration On Boot: Disabled
Configuration Filename:
TFTP Server IP Address: 198.202.188.174
Last Auto Configuration Status: Passed
Last Manual Configuration Status: Passed