68
Nortel WLAN Location Engine 2340 Dashboard
NN47250-504 (324122-A Version 01.01)
Example: The sample
Floor 1
looks like this, after completing these steps with the RF Fingerprint Tool to add a single
RF Fingerprint named
eng-cubes-back
:
To delete icons
To delete a RF Fingerprint or Sensor from the drawing, follow the given steps:
1
Right click the mouse, over the icon.
2
Select
Delete
from the context menu.
or
Use
Select Tool
to select the icon and press the DEL key (if the RF Fingerprint was just drawn, it is
already selected; just press the DEL key).
Specifying the Layout's Scale
Indicate the layout’s scale. Any Access Point coverage views that you choose to display on the layout are rendered accu-
rately using the data received from the Nortel WLE2340. To use the Scale Tool:
1
Measure the length or width of any physical location in the building monitored. The larger the actual
distance measured the better. For example, measure a room like a Cafeteria, Lobby, or a large area filled
with open office cubes, not an individual office.
2
Click
Scale Tool
in the Palette.
3
Move the cursor to the side of the drawn locale, which corresponds to the side of the actual location
where you began the physical measurement.
4
Click left mouse, and drag the cursor to the opposite side of the locale.
5
Indicate the distance and the units (feet or meters) using the Scale controls in the Properties panel.
