manualshive.com logo in svg

Nortel 2340, Configuration Manual

Share
Download
Nortel 2340 Configuration Manual Download Page 32

32

Nortel WLAN Location Engine 2340 Web GUI

NN47250-504 (324122-A Version 01.01)

These problems can be addressed, as outlined in 'Fine-tuning the Tracking Engine' chapter, and then the Evaluator can be 
rerun and another walk through performed.

This chapter explains the following:

•

Choosing and naming locales.

•

Selecting the channels on which to scan during calibration.

•

Creating and capturing RF fingerprints.

•

Running the Evaluator to determine the usefulness of the captured data.

•

Selecting the 802.11 band(s) to monitor for the walkthrough.

•

Verifying device tracking with a walkthrough.

Locales

Each locale needs to be named, so that the name is available for binding the RF fingerprints which form the locale's 

fingerprint

 when the calibration process begins. Locale names can correspond to the actual areas, that you are tracking 

(e.g. Conference Room, Lobby, or Warehouse 1).

Summary of Contents for 2340













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands