Nortel 2070 Troubleshooting Manual Download Page 15

Page: 15 / 56

Hardware Troubleshooting

This section describes the feature-specific troubleshooting tools available
at the operating system level.

Navigation

•

“TPS Hardware” (page 15)

•

“Ports to open in a firewall” (page 16)

TPS Hardware

This section provides information to troubleshoot hardware problems
related to the TPS 2050, TPS 2070 and TPS 2150 devices.
The table Front Panel LEDs describes the Front Panel LED indicators on
the TPS device.

Table 3
Front Panel LEDs

LED Indicator (from left to right)

Description

Amber system status LED

The amber system status LED lights up when
the system needs attention due to a problem
with power supplies, fans, CPU, or system
temperature.

Hard-disk drive activity LED

This LED blinks when activity is detected on the
hard-disk drive.

System power LED

This LED is green when the power supply is
turned on.

System status LED

The system status LED lights up when the
system needs attention due to a problem with
power supplies, fans, system temperature, or
hard drives.

Overheat indicator LED

This LED is red when the system overheats.

Nortel TPS 4.7

Threat Protection System Troubleshooting Guide

NN47240-700

01.01

Standard

2007

Summary of Contents for 2070

















































Search results

Summary of Contents for 2070

Reviews:

Nortel 2070, Troubleshooting Manual, Page: 15 / 56

Search results

Summary of Contents for 2070

Reviews: